Wof xxl 1415287782

For wider continuous and combined O-Pile systems. Width = 148mm.

Note: Female and male connectors, either the same or different size, can be combined to create a desired width.

fits

  • PZ/PZC
  • pipe
steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
weight
~ 15.80 lb/ft
~ 23.5 kg/m

Can be produced in 6 to 10 weeks.

downloads

Need To Build a Sheet Pile Wall?

Configure a Solution on iSheetPile.com.


General weld guidelines for connectors

  1. All seams have a = 6 mm (~.236”).
  2. Both sides have a tip and toe welding continuously of 500 mm (~20.0”).
  3. Both sides are flex welded in the free length between tip and toe welding with 200 mm/m (~8”/3.28’). The distance from seam to seam is 800 mm (~31.5”) or less.
  4. In salt water, if a permanent installation, the water side is continuously welded on the whole pile length. Rear side is as above in step #3.

Note: the above is for references purposes only and the welding design must be checked against other considerations such as anchor forces, shear forces and otherwise difficult driving conditions.