For continuous O-Pile systems using DTH in difficult driving condition.
- steel grade
ASTM Grade 50/60,
ASTM A690 MARINER® steel
Can be produced in 6 to 10 weeks.
General weld guidelines for connectors
- All seams have a = 6 mm (~.236”).
- Both sides have a tip and toe welding continuously of 500 mm (~20.0”).
- Both sides are flex welded in the free length between tip and toe welding with 200 mm/m (~8”/3.28’). The distance from seam to seam is 800 mm (~31.5”) or less.
- In salt water, if a permanent installation, the water side is continuously welded on the whole pile length. Rear side is as above in step #3.
Note: the above is for references purposes only and the welding design must be checked against other considerations such as anchor forces, shear forces and otherwise difficult driving conditions.